Enquiry
CLEMCO 100866 Nozzle 1 1/4 Inch Entry w Contractor Thread
Blast nozzle with long venturi Clemlite® silicon carbide liner, rubber jacket. Thread size and entry dimensions vary with nozzle series. With all related equipment correctly assembled and tested, the operator points the nozzle at the surface to be cleaned and presses the remote control handle to begin blasting.
The operator holds the nozzle 18 to 36 inches from the surface and moves it smoothly at a rate that produces the desired cleanliness. Each pass should overlap slightly. The operator must replace the nozzle once the orifice wears 1/16-inch beyond its original size.
Advantages
- Expected life with expendable abrasives is up to 500 hours
- Durable rubber jacket
- Non-binding contractor threads
- 42% lighter than tungsten carbide
Specification
Name
CLEMCO 100866 Nozzle 1 1/4 Inch Entry w Contractor Thread
SKU
100866
Brand
Condition
New
| Model # | Stock # | Orifice ID | Length | .Net Wt. | Pkg'd Wt | Holder | Washer | |
|
Fine 1-1/4" Thread |
SAS-4 SAS-5 SAS-6 SAS-7 SAS-8 | 28079 28080 28081 28082 28083 | 1/4" 5/16" 3/8" 7/16" 1/2" | 5-3/4" 6-1/8" 7-1/8" 8-1/2" 9-1/2" |
.95 lb 1.0 lb 1.15 lb 1.30 lb 1.45 lb |
1.0 lb 1.1 lb 1.2 lb 1.5 lb 1.5 lb | HEP Series | NW-4 NW-4 NW-4 NW-4 NW-4 |
| Contractor Thread | SMS-4 SMS-5 | 100864 100865 | 1/4" 5/16" | 5-3/4" 6-1/8" |
.70 lb .75 lb | 1.0 lb 1.0 lb | NHP Series | NW-25 NW-25 |
| Contractor Thread | SXS-6 SXS-7 SXS-8 | 100866 100867 100868 | 3/8" 7/16" 1/2" | 7-1/8" 8-1/2" 9-1/2" |
.90 lb 1.10 lb 1.20 lb | 1.0 lb 1.5 lb 1.5 lb | NHP Series | NW-32 NW-32 NW-32 |
Related Products
